Mechanical performance than the usual high-density polyethylene. Has outstanding impact resistance, resistance to stress cracking resistance, high temperature creep resistance, low coefficient of friction, self-lubricating UHMWPE rod specifications, excellent chemical resistance, fatigue resistance, noise damping resistance, nuclear radiation and the like. Use temperature 100 ~ 110 ℃. Cold, and can be used at -269 ℃. Density 0.935g / cm3 ultrahigh molecular weight polyethylene rod wholesale, molecular weight 2,000,000 product, its tensile strength 40MPa, elongation at break 350%, flexural modulus of 600MPa ultrahigh molecular weight polyethylene rod, Izod notched impact punch continued. The amount of wear (MPC method) 20mm. UHMWPE is a molecular compound, difficult process, and has superior wear resistance, self-lubricating, high strength, chemical stability, strong anti-aging properties, so the high molecular weight polyethylene to Tell ethylene, be sure to pay attention to its several characteristics that high molecular weight polyethylene rod production, the specific identification method is as follows: Weighing Rule 1: between 0.93-0.95 pure UHMWPE products made of proportion. less dense and can float on water. If it is not pure polyethylene material, will sink to the bottom. 2. Temperature measurement: pure UHMWPE products, at 200 degrees Celsius is not melted, will not be deformed, but become soft. If it is not pure UHMWPE material at 200 degrees Celsius there will be deformed.